S&B 2015-2017 Ford F-150 2.7L and 3.5L EcoBoost Cold Air Intake

The factory airbox on the 2.7L and 3.5L EcoBoost F-150 is built around cost and packaging, not performance. It restricts airflow, pulls warm air from inside the engine bay, and leaves horsepower on the table. If your truck is already supporting other bolt-ons, the stock intake becomes the choke point even faster.

The S&B intake (part 75-5081) replaces the entire factory assembly with a larger-diameter tube and an oversized filter that has been ISO 5011-tested to flow 43.10% better than stock. The fully enclosed airbox is not just a heat shield in name only. It seals with a silicone edge trim and uses a larger-than-stock silicone air scoop to pull a consistent column of cooler air from outside the hot engine compartment. The filter, coupler, tube seal, and scoop are all made from premium silicone rubber, rated to handle temperatures up to 400°F (204°C) without cracking or degrading.

Installation is straightforward. S&B’s snap-in lid design ditches the screws entirely, so the box opens quickly for filter inspections or cleaning without digging for tools. The entire kit uses factory mounting points and is designed to fit the 2015-2017 F-150 and F-150 Raptor without modification. The kit carries a CARB exemption (D-590-16) and is street legal across all 50 states. The oiled cotton cleanable filter is washable and reusable, giving you long-term value without the cost of replacement filters.

If your F-150 is a daily driver that also sees towing or performance upgrades, this is a clean, tested, no-compromise intake solution.

Application List

• 2015-2017 Ford F-150 2.7L EcoBoost
• 2015-2017 Ford F-150 3.5L EcoBoost
• 2015-2017 Ford F-150 Raptor 3.5L EcoBoost

• 43.10% airflow improvement: ISO 5011-tested. More airflow means your turbos are working with less restriction at every point in the power band.
• Fully enclosed heat-shielding airbox: Keeps the filter isolated from hot engine bay air. Consistent intake temps mean consistent performance, especially during back-to-back pulls or hot weather operation.
• Silicone air scoop, coupler, seal, and filter: All silicone components are rated to 400°F (204°C). Silicone holds up where rubber deteriorates, and it will not crack under heat cycling or high-underhood temps.
• Snap-in lid design: No screws, no lost hardware. The lid snaps shut with a silicone edge seal that keeps heat and debris out. Maintenance and inspections take seconds.
• Reusable cotton cleanable filter: Wash it, re-oil it, and reinstall. No replacement filter costs, no disposable media. The cotton cleanable element is designed for long-term reuse.
• 99.27% filtration efficiency: High airflow does not mean compromised filtration. The cotton cleanable element captures 99.27% of particles, keeping contaminants out of your EcoBoost’s intercooler and combustion chambers.
• CARB exempt (D-590-16), 50-state street legal: No worries about emissions compliance. This intake passes California standards and is street legal everywhere in the US.
• Direct fit for 2015-2017 F-150 2.7L, 3.5L EcoBoost and Raptor 3.5L: Designed around the factory mounting points for a straightforward bolt-on install.
• More aggressive intake sound: The larger tube and filter diameter produce an audible improvement in induction noise under load. If you want to hear the turbos spool, this delivers.
• Million Mile Warranty: S&B stands behind their intake systems with a Million Mile Warranty. Buy it once, run it for the long haul.

Prop 65 Warning

WARNING: This product can expose you to chemicals including carbon black, silica – crystalline, methylene chloride, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. MORE INFO at www.P65warnings.ca.gov

Looking to ensure you get the perfect part for your unique application the first time? Full-Race is here to help.

Email us at gofaster@full-race.com or call us at (602) 437-2101 to find out how we can help you achieve your goals.

Make sure to tag and follow us on Instagram & Facebook to get featured! @fullracemotorsports